 Balance Jig - by Howard Sullivan
Balsa Facts - by SIG Manufacturing Co.
Buddy Box Leads - by Futaba Inc.
Carl Goldberg Eagle II review by Jim Sharp
Cellphone Warning! Computer Radios and cellphones DON'T mix!
Engine Modifications - by Steve Jahr
Facts about NiCad Batteries - by Tony van Roon
Flight Simulator Controller - by Howard Sullivan
Glow Plugs - by FOX Manufactureing Co.
Glow Fuel - by Tony van Roon
Glow Fuel Safety Alert!
Intro to Servos, I - Introduction, construction, modifications
Intro to Servos, II - X-ref chart, clock, driver, controller, freq.
JR XP783 Transmitter Review - Helicopter version
JR XP8103 Transmitter Review - Aircraft version
Leaf Spring Tail Wheel - by Howard Sullivan
Maintaining Your Batteries - by Jim Ewing
|
Model Trim Problems - by Mike Briese
Mouse Can Muffler - by Bob Adkins
NiCad Seminar - by Red Scholefield
Practical Model Design - by Howard Sullivan
Propellers, prop-balancing - by Tony van Roon
Prop Chart - by Top-Flite
R/C Interference Primer - by Max Feil
Red's R/C Battery Clinic - by Red Scholefield
Setting-up a Helicopter - by Tony van Roon
Servo Connector Pin-out - by Howard Sullivan
Servo Interconnections - Servo wire color codes
Some Answers About Fuel - by Horizon Hobbies Distributors
Throttle Valve Adjustment - by Howard Sullivan
Transmitter Tray - by Howard Sullivan
|