China Best Products  FAQs:

Click here for dealer questions and answers.

All sales are final, no refunds or exchanges.

Q: How to place order?

A: Information we will collect from you when you order

Please email, fax or mail the following information to us,

order model number, options, and implements

order quantity

shipping destination, choose a warehouse on our list that we ship to, or to door delivery

You name

phone number

fax number

Physical address (not a P.O. box)

If you are in the states, please call our customs broker to provide your SSN or tax ID

Joann 562-250-0574

Q: When should I pay the down payment? Is the down payment/deposit refundable?

A: After we confirm the price, you have 7 days to pay. The down payment/deposit is NOT refundable, so we know we deal with serious customers only, this policy can effectively lower our prices, and benefit both sides.

Q: When should I pay the balance?

A: We encourage our customer to pay off the balance as soon as possible when you get the notice from us or our customs broker for the estimated arrival date; anyway you must pay off the balance before the warehouse pick up. Usually our customer will have up to 5 days for free storage, the customer will be responsible for the demurrage and other fees/ charges because of the late payment.

Please pay the balance by cashier's check by overnight or bank wire transfer.

After the free storage, we will wait for up to 9 days for your payment of the balance, after 9 days, if we didn't get your payment, the tractor or other goods will be deemed as abandoned, the down payment/deposit paid will be surrendered, we, China Best Products have the right to dispose the tractor or other goods at will at any time.

Q: How many days for free storage in the warehouse before I pick up?

A: Up to 5 days for LCL(less container load) , 2 days only for container.

Q: What kind of payment do you accept?

A: Money order or wire transfer.

Q: What is TNT?

A: www.tnt.com

Q: What is servo?

A: http://www.seattlerobotics.org/guide/servos.html

Jump to questions of tractors

Questions for wind turbines

Q: How to calculate the wattage of my house/farm from the hydro bill?

A: Usually 60 days for the bill cycle, 24 hours per day, let's say you paid for 1700 KWH, the mean KW is 1700/60/24 = 1.18KW, so you need  roughly 1.18 * 1.2 = 1.42kw， so 2KW is model for your house/farm, 1.2 is the factor we use for this calculation

if you want to have your air conditioner, dryer, washer, fridge, ceiling fans, water pump, microwave ovens or other appliances with inductive loads inside connected with off-grid wind turbine, the start-up current of these appliances are 5 to 7 times bigger than the running current for about 2 minutes, these appliances request more power to start, it is critical for off-grid wind turbines, so you if choose off-grid wind turbines, you choose from 2kw * 3 = 6kw and up, to make sure these appliances will work properly

the actual yield of the wind turbine depends on the wind speed in your area

if you choose on-grid wind turbine, you can get the excessive power you request from the grid, you can choose from 2KW to 10KW wind turbine in according to your budget.

If you have equipment that is labeled as BTU, not kw

Btu(British thermal unit) is a measure of energy while kw is a measure of power. Use the following for conversion.

10000 Btu/hour = 2.93 kw
1000 Btu/minute = 17. 58 kw
1 Btu/second = 1.055 kw

1 hp = 1.341kw

Q: How many batteries I need for my wind turbines?

A: The batteries you need depends on the hours that need to use per day, let us assume that,

you use 6 hours per day,

the capacity of wind turbine is 5000w,

the DC output voltage for the controller is 240Vdc

the unit battery capacity will be 5000W x  6H x 1.67 / 240V = 208.75 AH or bigger, 1.67 is the factor we use for the calculation

if you use 300 AH 12V batteries, you need 240V/12V = 20 units

Q: Where can I find the chart for the wind speed and wing turbine yield?

A: We have these charts, vertical 200w to 5KW, 10KW to 30KW, horizontal 200w to 20KW in word file.

Q: If I need 5KW for my house, do I choose a 5KW wind turbine?

A: You need to check the mean wind speed of your area, and the tower height, terrain, location of the wind turbine will dramatically affect the yield of the wind turbine

If the wind speed for your area is more than

3m/s or 10.8km/h or 6.75mph for more than 3000 hours annually, congratulations, you can enjoy the savings to use our wind turbines,

if not, please check our solar panels if you have enough sun shine.

wind speed in Canada

wind speed in USA or this link city data by US cities

then you check the rated wind speed for the wind turbine, for 5KW, it is 10m/s, or 36km/h or 22.5mph, you can find the wind speed requirements from here

if you have the mean wind speed bigger than 10m/s, your get the full 5KW from the wind turbine

if you have the mean wind speed 7m/s, you get roughly 5KW x 75% = 3.75KW from wind turbine, you can choose a bigger wind turbine in according to your budget

if you have the mean wind speed less than 2m/s, the wind turbine is not your choice, you may consider solar power

you can choose to use solar power with your wind turbine, or on-grid wind turbine to get a fully coverage of your electricity consumption

Q: How to convert m/s to KM/H or MPH?

A: 1m/s = 3.6 KM/H = 2.25 MPH

Q: What is the pros and cons of vertical wind turbines?

A: Vertical wind turbines are more efficient than horizontal wind turbines(up to 18%), bigger capacity(up to 3 Mw), lower start up wind speed(2.5m/s or 9km/h or 5.6 mph), higher survival wind speed( 60m/s or 216km/h or 135mph),  silent, never twist the wires/cables up, but more expensive.

Q: Do you have CE for your wind turbines?

A: Yes, we have CE for our horizontal wind turbines up to 20kw,

for on-grid inverters, we have CE for up to 6kw

Q: What if I can use both wind turbine and solar power in my area?

A: Because the solar panel is more expensive than wind turbine, so you should use as more wind as possible.

for wind speed less than 4m/s (14.5km/h or 9mph), 90% solar, 10% wind

for wind speed more than 4m/s (14.5km/h or 9mph) but less than 5.36m/s (19.3km/h or 12mph), 50% solar, 50% wind

for wind speed more than 5.36m/s (19.3km/h or 12mph), 30% solar, 70% wind

Q: grid tied inverters for solar and wind

A: Xantrex CSA UL for solar 3.8kw about $2700

SMA Sunny Boy UL for solar 6kw about $4000

SMA Windy Boy UL for wind generator 1800U 1.8kw US$2600, 2500U 2.5kw US$3000, 3800U 3.8kw US$3425, and 6000U 6kw 240vac about US$5750

Beacon UL CEC NYPSC for solar 5kw about $6800

Fronius for solar 5.1kw 240vac about $3500

SW swries 5.5kw 120vac $2800 Xantrex Grid Tie Interface GTI $430

Outback power for solar 3.6kw about $1800

If you need the capacity bigger than 6kw, you can couple two 6kw inverters.

Q: Where I can find The Database of State Incentives for Renewable Energy (DSIRE)?

A: http://www.dsireusa.org/

Q: What is world voltage?

A: http://www.kropla.com/electric2.htm

Q: What is islanding?

A: The first safety issue that comes to everyone¨s mind for small customer-sited systems is a condition called
islanding. Islanding is where a portion of the utility system that contains both loads and a generation
source is isolated from the remainder of the utility system but remains energised. When this happens with
a distributed power system, it is referred to as supported islanding. The safety concern is that if the utility
power goes down (perhaps in the event of a major storm), a distributed generation system could continue
to unintentionally supply power to a local area. While a utility can be sure that all of its own generation
sources are either shut down or isolated from the area that needs work, an island created by a residential
system can be out of their control.
There are a number of potentially undesirable results of islanding. The principal concern is that a utility
line worker will come into contact with a line that is unexpectedly energised. Although line workers are
trained to test all lines before working on them, and to either treat lines as live or ground them on both
sides of the section on which they are working, this does not remove all safety concerns because there is
a risk when these practices are not universally followed.
Fortunately, static inverter technology developed for grid-interactive systems is now specifically designed
so that there is practically no chance of an undesired supported island stemming from an interconnected
residential or small commercial systems. This feature is referred to as anti-islanding. Grid-tied inverters
monitor the utility line and cease to deliver power to the grid as quickly as necessary in the event that
abnormalities occur on the utility system. Such performance requirement is generally described in both
the inverter and the interconnection standards.

Q: What is manual disconnect?

A: An external manual lockable disconnect switch ("manual disconnect") in the interconnection context is a
switch external to a building that can disconnect the generation source from the utility line. The
requirement for a manual disconnect, stems from utility safe working practices that require disconnecting
all sources of power before proceeding with certain types of line repair.

Whether a manual disconnect for small systems, such as photovoltaic (PV) systems, using certified
inverters should be required has been the source of considerable debate. In strict safety terms, a manual
disconnect is not necessary for most modern systems because of the inverter¨s built-in automatic
disconnect features as discussed in the previous section. Both the Canadian Electrical Code (CE Code) and
the National Electrical Code (NEC) in the United States, refers to the need for an additional switch that is
(1) external to the building, (2) lockable by utility personnel, and (3) offers a visible-break isolation from
the grid. As such, a manual disconnect is an additional means of preventing an islanding situation. And,
the key from the utility perspective is that the switch is accessible to utility personnel in the event of a
power disruption when utility line workers are working on proximate distribution system lines. In addition,
in many situations, utility line workers can provide redundant protection against islanding by removing a
customer¨s meter from the meter socket. Still, many utilities require a separate, external manual
disconnect.
While the cost of installing such a switch is not large relative to the overall cost of a micropower system, a
PV system for example, when compared to expected energy savings from the system, such a switch is
relatively expensive. Also, for systems located on the top of tall buildings, such a switch becomes very
expensive. In the USA, some state-level net metering and interconnection rules require that the utility pay
for the installation of a manual disconnect. In New Mexico, use of the meter is an optional alternative to a
separate switch while in many other states a manual disconnect is not required, at least for small systems;
that is the case of California, New Jersey, Washington, and Nevada. Also, some utilities, such as those
owned by the New England Electric System, have established their own interconnection guidelines that do
not require an external manual disconnect for small systems.

Q: What is three phase?

A: Check wikipedia answer here.

Q: What is single phase?

A: Check wikipedia answer here.

Q: wind speed and wind pressure

A:

The wind pressure can be approximated by: Pressure = ?x (density of air) x (wind speed)² x (shape factor)

• The density of air is about 1.25 kg/m³.
• The shape factor (drag coefficient) depends on the shape of the body. It has order of magnitude 1 and is dimension less.
• The wind speed must be expressed in m/s. In that case the pressure has units kg/m/s², i.e. N/m².

Q: Height and wind speed

A:

 

IEEE 519 - 1992 are recommended practices and requirements for the harmonic control of electrical power systems. It sets maximum total harmonic distortion (THD) limits on voltages and currents that a power system is allowed. Therefore, the PCS cannot inject harmonics into the grid that cause the system to go above these limits set forth by the standard and the PCS should filter these harmonics [23].

IEEE 929 - 2000 are recommended practices for the utility interface of photovoltaic (PV) systems. Though written for PV inverters, the guidelines and specifications can be adapted to be used for an inverter connecting a DER to the utility.

IEEE 1547 - 2003 is the standard for the interconnection of distributed resources to the utility grid. This standard outlines requirements and specifications that the conversion systems of the DER have to meet to be allowed to connect to the utility. This standard does not deal with the concepts and issues of intentional islanding, and currently dictates that the DER shall disconnect from the distribution system when islanding events occur. As noted above the standard does leave open a section for consideration of intentional islanding in future revisions of the standard. An analysis of 1547 raising questions to issues proposed by it can be found in [24].

UL 1741 is the Underwriters Laboratories' testing standards for equipment as they relate to IEEE 1547.

Protection against contact and infiltration of water and dirt

In many ennvironments electronical devices must stand rough conditions and work for their indetnded period of time nevertheless they are set out to dirt, dust and humidity. IP protection classes define, how and where they can be used without getting a safety risk. Especialy in medical areas the safety is very important for the device and all above for the patients.

The following table shows the different IP protection classes:

Questions for tractors

Q: Who should I contact when my tractor sits in the warehouse?

A: In the states, please call Joann/Jeff 562-250-0574

In Canada, please call Cathy/Linda/Heather 519-621-7600

Q: When should I order?

A: Two or three month ahead of your using.

Q: What is not included in the price?

A: Warehouse handling charge, usually $30 to $50 per item, if it is not a to door delivery

Q: Do you ship to APO/FPO addresses?

A: Not yet, we can ship to our associated warehouse on our list, street address for USA or Canada with extra shipping charges, or basic port world wide

If you are a dealer and you order a whole container, your container might be chosen for customs exam, this is a rare happen event, the charge($3000 or more), will be transferred to you.

Q: How to get my free CTOA membership for one year?

A: Support CTOA, support Chinese tractor owners, help new member to ask questions regarding "Buying A Chinese Tractor", This is a limited offer for the first 100 members.

It is easy and straightforward as 1-2-3,

Choose the user name starts with "CBP-"

For active members only, post at least one related question under "Buying A Chinese Tractor" on CTOA (Chinese Tractor Owners Association) forum, we determine the eligibility at our sole discretion

We pay CTOA or reimburse you the $15 membership fee by paypal.

Now is also available for renewal for existing members that helping other members.

Q: What kind of documents I need to provide when I claim for the first year warranty labor costs(FYWL)?

A: To be eligible to our FYWL, please

• choose your favorite local tractor shop as your registered repair service provider(RRSP), your RRSP must be a legitimate business with licensed technician
• submit RRSP's business name, business address, phone number, and fax number (if provided), hourly rate, and their service price list
• along with the receiving date of your tractor,  the tractor model number and serial number, your name and contact info
• within 30 days after you get your tractor,
• send the info by mail or fax

Our FYWL covers 365 days from the date you receive the tractor, and the claim must be submitted within 30 days after the service date.

Our FYWL is for our retail customers only, not for dealers or distributors.

The documents you need to send when you submit the claim for FYWL,

• original receipt from the RRSP, with their business name, business address and phone number, fax number(if any) on it, details of the repair job done with tractor model number and serial number, service date, break down list of hours for each job done, hourly rate
• part number(s) and photos of the defective parts
• your name, address, phone number, fax number, and email address

Please be aware that we cover warranty labor only, that means the labor for the replacing of the defective parts, not the worn out parts. Parts costs, tractor assembly if you ordered crated tractor, regular maintenance, modification to the tractor or installation of new features are not covered. We determine the expense eligibility at our sole discretion, if you are not sure, please ask before proceed.

Limits for eligible expenses: US$500

maximum hour rate: US$50

towing charges are not covered

This is a limited time offer to 100% prepaid customers only.

Some restrictions apply.

Q: What is shuttle shift?   

A: Transmission with shuttle shift promises the convenient handling of front-end loader, which requires a lot of back and forward moving. The synchronized main gearshift allows easier and quicker shifting, stop but keep the same gear ratio.

Q: I am in Canada, what's the difference?

A:

• Pickup: Canadian ports or major cities
• Fund: All our prices in US funds, we accept Canadian dollars, please check the exchange rate here
• Tax: You need to pay GST(7%) or HST(15%) to Canadian Customs. Tractors with PTO 60hp and up are zero-rated(0%), some implements are zero-rated(0%), check CRA webpage for details
• Duty: duty free for tractors and implements, ask us for other products
• Customs clearance: Customs broker's charge US$450/C$675 plus GST/HST for some products, tractors, backhoes and wood chippers are price all included, ask us.
• We collect GST/HST up front
• We collect PST up front for end users in Ontario
• Exchange rate: Call 1-800-461-9999 toll free to find the exchange rate for US dollar to Canadian dollar

Three provinces ( Nova Scotia, New Brunswick, and Newfoundland and Labrador referred to as the participating provinces) harmonized their provincial sales tax with the GST to create the harmonized sales tax (HST).

Q: What is the lifting capacity of the three-point hitch?
A: 20 HP - 810 pounds, 25 HP - 875 pounds, 30 HP - 1100 pounds.

Q: What is the hydraulic pressure?
A:20 HP - 2000 psi, 25 HP - 2000 psi, 30 HP - 2275 psi.

Q:What equipment is available for the tractors?
A:Rotary cultivator and finish mower, flail mower, topping mower, topper slasher, box grader, 12 disc, 3 point quick hitch, PTO driven chipper/shredder, and 1 ton 4 wheel manual dump trailer frame. Also front end loaders are available for all except the 20-80 HP with Ag tires and backhoes available to fit the 25 HP and 80 HP tractors.

Q:What is the lifting capacity of the front-end loader?
A:20 HP turf - 800 pounds, 25 HP - 900 pounds & 30 HP - 1000 pounds.

Q:What is the weight of the tractors?
A:20 HP - 2660 pounds, 25 HP - 3040 pounds, 30 HP - 4380 pounds.

Q: What kind of fluids you need?

Q: Are your tractors new?

A: Absolutely.

Q: Who are you? And Where are you?

A: We are your own professional buyer. We are located in Ontario, Canada.

Q: What is your contact info?

A: Here your are.

Q: How long have you been in Business?

A: We start our service in Canada since January 2000.

Q: How can I know if I pay you, I will get the products I ordered? Not something else or even nothing?

A: Actually, there is no answer for this question.  Our service is not for everyone, just for the people "Believe it before you see it".

Anyway, there are still something that you can do:

•     We have more than one shipments comes in every week, that keeps our customs brokers busy
•     We are in Canada, not that far from you, you can call us, fax us, mail us and visit us.
•     Finally, we have been in business for years, Do you own research.

Q: Why I need to pay up front?

A: That's the reason we can keep our price lower than others. We save the money for credit check and dealing with frauds.

Q: Where can I find spec for this tractor?

A: Here you are.

Q: Do you provide references? If I want to be your reference, can I make money from it?

A:  We do provide references, they are our existing customers. We don't pay someone to be our "references".

Q: How can you keep your prices low, do you use same parts and from same factory?

A: You can see we provide a wide line of different products, we don't use one product to cover all of our overheads. All Jinma tractors and implements are from same factory therefor keep the same quality.

Q: Can I order only one tractor?

A: Yes.

Q: Can I order only one implement?

A: Yes.

Q: Can I order an assembled tractor?

A: Sure, extra freight from $1000.

Q: Does a assembled tractor cost more money?

A: No and Yes, compare to crate tractor, they have the exactly same FOB price; but much more freight because of big volume.

Q: Does my tractor come in a crate?

A: Yes for all Jinma/Taishan/Foton small tractors(20 to 45hp), usually 50/80 hp tractors are ready to work.

Q: Can I order an assembled tractor?

A: Sure.

Q: What  should I do if I want to be your reference customer?

A: Answer other potential customers' questions, show them your tractor, tell them your experience bought from us, tell them our service, that's it.

Q: I need packing information

A: Packing

Q: After payment, how long will it take to get the tractor delivered locally, in USA?

A: For customers in the USA, normally 50 - 90 days after your payment, you can get the tractor anywhere in the USA. ( 20 days for manufacturing, 30 - 40 days for sea shipment and delivery), all time are estimated.

Q: How long will it need to assemble it?

A: Depends on your experience, hours to days.

Q: What do I have to assemble for my crate tractor?

A: Wheels, fender guards, roll bar, seat belt, battery, hood, lights, front weight frame and etc, all in the manual.

Q: Can I assemble it by myself?

A: Yes, most of the owners did that already.

Q: Do I need special tools?

A: No, all tools you need come with the tractor.

Q: What is the Basic tractors have?

A: They have all these:
 
 Rear wheel weights
    Front Weights
    Power Steering (Jinma)
    Front cross mount power steering (Jinma)
    Head lights
    Rear work lights
    Spring Seat

    rigid roll bar

   

Options are:
    foldable Roll bar
    canopy  


Q: Available Colors?
A: Red for Jinma; red, green for Foton.

Q: Can I order special/own color?
A: Only for big orders, not for one set.
 
Q: Are these standard?
    Glow Plug
    Rear Differential Lock
 
     Gauges - Oil Pressure
              Water Temperature
              Fuel
              Tach
              Amp
 
 The creep clutch you reference is the creeper other mention that in conjunction with the Hi/Lo on the trans actually gives you 12 forward and 4 reverse speeds.
A: All these are yes.

Q: Can I get color matched touch-up paint?

A: Usually the loader and backhoe are black, the wood chipper is red or green.

Q: Can Front end loader and backhoe be color matched to the tractor?

A: Yes for longer waiting time.

Q: I would prefer individual gauges (Oil Pressure, Water Temperature, Fuel,
Tach, Amp and Hour Meter), can I get them instead of the unit with all
the gauges in one?

A: No problem.

Q: Warranty Spare Parts etc. Who handles the warranty parts and do you
handle any spare parts?

A: Yes, one year free parts, but you need to pay the freight and other cost if any.

Q: I have heard that the factory will occasionally throw in spare filters
and belts. Is this true?

A: Yes, it is true.

Q: I do not order the backhoe with the tractor and front end loader.
Can I get the front end loader mounts that are for tractors with backhoe instead of the
front end loader only mounts if I order only the front end loader initially. (This would eliminate
the need to change front end loader mounts when I add a backhoe at some later date).

A: No problem! I can provide front end loader mounts that can add a backhoe.

Q: Can I import it by myself?

A: Yes for customer not in USA or Canada. You choose the model and implements, find a customs broker and freight forwarder. Pay and get it around 50 days.

Q: I am not familiar with International trade, is it easy to pay?

A: Yes, we are in Canada, there is no difference with a local purchase, we accept wire transfer, money order, and certified check.

Q: Where can I get parts?

A: With your tractor/implement order, local parts suppliers, online store or from us.

Q: Are parts expensive?

A: You can order some spare parts when you order the tractor, and competition keep an average of profit.

Q: Do you provide financing?

A: No at this time.

Q: Can you tell us more about the factory?

A: Details for Jinma or Details for Foton

Q: Does any of tractors pass EPA test?

A: Most of them, eg 25hp, 30hp, 35hp, 45hp and 55hp.

Q: Where can I find EPA form? And is it hard to fill?

A: http://www.epa.gov/OMS/imports/forms/3520-21.pdf and it is easy, we will provide all the info you need to fill the form, usually the customs broker can do this for you for $35.

1 KW = 1.341 HP

8701.90.1005: TRACTORS, SUITABLE FOR AGRICULTURAL USE, NEW, POWER TAKE-OFF (PTO) TYPE, WITH A PTO OF LESS THAN 14.9 KW(20 HP), NESOI

8701.90.90 21 Canada

8701.90.1010: TRACTORS, SUITABLE FOR AGRICULTURAL USE, NEW, POWER TAKE-OFF (PTO) TYPE, WITH A PTO OF 14.9 KW(20 HP) OR MORE BUT LESS THAN 22.4 KW(30 HP), NESOI

8701.90.90 22 Canada

8701.90.1015: TRACTORS, SUITABLE FOR AGRICULTURAL USE, NEW, POWER TAKE-OFF (PTO) TYPE, WITH A PTO OF 22.4 KW(30 HP) OR MORE BUT LESS THAN 29.8 KW(40 HP), NESOI

8701.90.90 23 Canada

8701.90.1030: TRACTORS, SUITABLE FOR AGRICULTURAL USE, NEW, POWER TAKE-OFF (PTO) TYPE, WITH A PTO OF 29.8 KW(40 HP) OR MORE BUT LESS THAN 44.8 KW(60 HP), NESOI

8701.90.90 24 Canada

8701.90.1035: TRACTORS, SUITABLE FOR AGRICULTURAL USE, NEW, POWER TAKE-OFF (PTO) TYPE, WITH A PTO OF 44.8 KW(60 HP) OR MORE BUT LESS THAN 59.7 KW(80 HP), NESOI

8701.90.90 25 Canada

8701.90.1040: TRACTORS, SUITABLE FOR AGRICULTURAL USE, NEW, POWER TAKE-OFF (PTO) TYPE, WITH A PTO OF 59.7 KW(80 HP) OR MORE BUT LESS THAN 74.6 KW(100 HP), NESOI

8701.90.90 26 Canada

8701.90.1045: TRACTORS, SUITABLE FOR AGRICULTURAL USE, NEW, POWER TAKE-OFF (PTO) TYPE WITH A PTO OF 74.6 KW(100 HP) OR MORE BUT LESS THAN 89.5 KW(120 HP), NESOI

8701.90.90 31 Canada

8708.70.3500: PARTS AND ACCESSORIES FOR TRACTORS (EXCEPT TRACTORS SUITABLE FOR AGRICULTURAL USE), NESOI

8708.29.91 Canada Parts for the tractors of tariff item No. 8701.10.10, 8701.30.00 or 8701.90.90 duty free

8708.99.92 00 Canada Other for the tractors of tariff item No. 8701.10.10, 8701.30.00 or 8701.90.90 duty free

8701.30.1015: TRACK-LAYING TRACTORS, SUITABLE FOR AGRICULTURAL USE, NEW, WITH A NET ENGINE POWER OF LESS THAN 93.3 KW(125 HP)

8701.30.1030: TRACK-LAYING TRACTORS, SUITABLE FOR AGRICULTURAL USE, NEW, WITH A NET ENGINE POWER OF 93.3 KW OR MORE BUT LESS THAN 119.4 KW

8701.90.11 tractor for Australia duty free

8708.29.30 parts for Australia duty free

An example of JM184 EPA form

Engine Manufacturer: Yang Dong Co., Ltd

Engine Model, model no. and serial number: Y290, Y290, 20505868

Engine build date: Jan, 1999

Power rating (Specify and check kW/Hp): 18hp

Equipment Manufacturer, model and serial number and type of equipment: Yancheng tractor factory, JM-184, 12345, agricultural tractor

check 10a for less than 25hp 

An example of JM254 EPA form

Engine Manufacturer: Yang Dong Co., Ltd

Engine Model, model no. and serial number: Y385, Y385, 20505868

Engine build date: Jan, 1998

Power rating (Specify and check kW/Hp): 25hp

Equipment Manufacturer, model and serial number and type of equipment: Yancheng tractor factory, JM-254, 12345, agricultural tractor

check 10b for greater than or equal to 25hp but less than 50hp 

An example of JM284 EPA form

Engine Manufacturer: Yang Dong Co., Ltd

Engine Model, model no. and serial number: Y385, Y385, 20505868

Engine build date: Jan, 1998

Power rating (Specify and check kW/Hp): 28hp

Equipment Manufacturer, model and serial number and type of equipment: Yancheng tractor factory, JM-284, 12345, agricultural tractor

check 10b for greater than or equal to 25hp but less than 50hp  

An example of JM304 EPA form

Engine Manufacturer: Yang Dong Co., Ltd

Engine Model, model no. and serial number: Y395/Y480, Y395/Y480, 20505868

Engine build date: Jan, 1998

Power rating (Specify and check kW/Hp): 30hp

Equipment Manufacturer, model and serial number and type of equipment: Yancheng tractor factory, JM-304, 12345, agricultural tractor

check 10b for greater than or equal to 25hp but less than 50hp 

An example of FT304

Engine Manufacturer: Jiangshu Jiangdong Group  Co.

Engine Model: TY395

Engine Serial Number:02K1234567

Tractor Serial Number:12345
Engine the date of manufacture: Jan, 1998

Tractor Manufacturer Name:

BEIQI FUTIAN WEIFANG AGRICULTURAL EQUIPMENTS BRANCH CO.

Tractor Model:FT-304

Check 10b, and sign it

An example of KM454 EPA form

Engine Manufacturer: Shangdong Tractor Works

Engine Model, model no. and serial number: 395T, 395T, 1234

Engine build date: Dec, 1998

Power rating (Specify and check kW/Hp): 45hp

Equipment Manufacturer, model and serial number and type of equipment: Shangdong tractor works, KM454, 12345, agricultural tractor

check 10b for greater than or equal to 25hp but less than 50hp

An example of JM454 EPA form

Engine Manufacturer: Fujian Lijia Co., Ltd

Engine Model, model no. and serial number: SL3105ABT, SL3105ABT, 123456

Engine build date: Jan, 1998

Power rating (Specify and check kW/Hp): 45hp

Equipment Manufacturer, model and serial number and type of equipment: Yancheng tractor factory, JM-454, 12345, agricultural tractor

check 10b for greater than or equal to 25hp but less than 50hp 

40hp Bulldozer model: YCT406S

Bulldozer Manufacturer : GUILIN YUCHAI CONSTRUCTION MACHINERY COMPANY LIMITED

Engine model: TY490T

Engine manufacturer: Jianghui Power Company Ltd.

84291100.--Self-propelled bulldozers and angledozers, for track laying--01/01/1999

84291900.--Self-propelled bulldozers and angledozers other than track laying--01/01/1999

duty free for US

Q: What is 3 point hitch?

A: http://www.speeco.com/three-point.asp

Q: What is hydraulics?

A: http://www.adtdl.army.mil/cgi-bin/atdl.dll/fm/5-499/toc.htm

Q: Is the fuse box Chinese or US?

A: Chinese, but easy to be changed to US style.

Q: Does Jinma tractor use special oils or fluids?

A: No, use standard type CF or CG or CH Motor oil 30W or 15W40 for the engine and use 303 or 145 type
transmission/hydraulic fluid in the transmission and the hydraulics. You can get these from your local auto parts dealers.

Q: Do you ship to this port?

A: We ship to all basic ports around the world.

Q: Do any of your Jinma tractors come with a hydrostatic transmission?

A: Nope.

Q: Does the Front End Loader have quick connection for Jinma?

A: Not yet.

Q: Are gauges US or metric?

A: Metric.

Q: Does your tractor come with "this new feature" or new design?

A: Yes, if it is from the factory, maybe not on our web site, because we don't keep a stock, you always get something new.

Q: Can I have this old feature or old design?

A: No guarantee, check with us.

Q: Do you have Industrial (R4) tires?

A: No.

Q: What kind of fluid do I need?

A: Antifreeze, and battery electrolyte.

Q: Can I order a front loader or backhoe made by other manufacturers to fit with your tractors? How about other accessories such as tiller, plough etc?

A: Yes, you can, you would be responsible for making sure the loader or backhoe was designed to be mounted on the tractor you select. Our 3 point system and PTO are designed to international standards and will accept all class 1 - 3 point implements.

Q: How are the spare parts supplied?

A: Each tractor comes with some free spare parts. Other spare parts out of the parts book provided with each tractor.

Q: For Foton, how long do I need to wait after payment?
A: It will ship from their factory after 40 days, and another 20 to 30 days for ocean.

Q: For Foton 50 to 80hp, how many tractors can be held in a 40' container?

A: 3.

Q: For Foton 30 to 40hp, what is the cylinder model, can you upgrade it? How much?

A: Standard is 2 cylinder, can be upgraded to 3 cylinder for an extra $300.

These questions are for dealers only.

Q: Are there any other fees and/or charges for dealer?

A: Other fees or charges:

• H/C (handling charge) $175 per order
• Forwarder H/C $100 per shipment
• Warehouse H/C from $80 per shipment
• Customs broker $450 per shipment
• Merchandise Processing Fee 0.21%(Minimum $25)
• Harbor Maintenance Fee 0.125%
• Single entry bond 0.5%(Minimum 50)
• Automated Manifest System (AMS) charge $35/$45 for 20'/40'container
• EPA form $35
• Port security fee $25
• USDA $15
• X-ray exam
• Customs Container exam fees, around $3000 for the container

Q: What are the benefits to be your dealer?

A:

，         As our local dealer in your area, you can land potential customers who are attracted by our advertising

，         Through our extensive sourcing channel in China and long-standing relationship with these suppliers, you can readily find quality products at a competitive price, and buying power of our bulk order quantity of our dozens of dealers

，         With our valuable partners, we can help you deal with regulatory, and customs services in China

，         Our finance and accounting team will assist you with regard to North America's customs, taxes, and business planning issues

Q: Can I order only one tractor, if I am a dealer?

A: Yes, but you can't make a good margin for one tractor, so we suggest you to order container load. If you keep your own stock, we drive customers over to you.

Q: Who can be your dealer?

A: Any business entity that places order to us for resale purpose, with detailed business plan, purchase schedule, and sales target (both target market and target clientele).

Q: How can I become a dealer?

A: You must have or will have a business, order from us for resale. It is advised, but not mandatory, that you will keep certain level of stock (finished goods and/or spare parts) and provide after-sale services to customers.   

With regard to business plan, future purchase schedule, and marketing strategies, our finance and accounting team will render necessary service at reasonable charge.

Q: Why do I need a business plan?

A: We will assess the market potential at your area, help you reduce investment risks, and take into consideration other sales-related issues such as advertising, marketing, and after-sale services.

Q: What should you consider to create a thorough business plan?

A:

，         Your initial investment capital, working capital needs, and future available incremental capital

，         Your target markets, target clientele, and realistically estimated sales volume, both in short and long term

，         Your financing needs, if any

，         Your tax bracket and tax planning, which is largely related to your form of business, either sole proprietorship, partnership, or incorporation

，         The size of your business, number of employees, square feet needed for your store and warehouse, and lease arrangement and leasehold improvement

，         Your personal business experience that is related to the products that you will offer in you business

，         To start up the new business, you need carefully assess the local market potential and draft your future marketing plan to explore the target markets and clientele

，         You must realistically estimate the annual sales volume, the operating and financing costs, and profit margin

，         You must learn forehand that whether there are potential legal or regulatory constraints with regard to sales of Chinese products in your target markets, and the potential cost to deal with these issues

，         You should obtain as much as possible the information about existing and potential competition in the target market, the competitors¨ strength and weakness, and your competitive edge to gain desirable market share

，         You should also learn as much as possible client need and preference, and their loyalty to existing competitors

，         You should consider the types of cooperation with us, either mere exclusive dealer or other forms of relationship, such as co-investment (if so, you should have in mind the potential profit-sharing schedule, and the related liability and obligation)

Q: Where can I find your business plan experts' contact info?

A: Here you are. You can mail, email, fax or call.

Q: Why do I need a purchase schedule?

A: Most of our products need 20 days or longer time for production, ocean shipment, inland shipment, and customs application. To facilitate in-time delivery, you need a plan in advance. In addition, we can also assess the future discount rate as related to the potential demand.

Q: What can you do for my business?

A: The professional service we offer:

，         New business incubation

，         Supplier selection and product sourcing

，         Product and service delivery

，         Customs service, both in China and North America

，         After-sale service and spare parts provision

，         Business planning

，         Tax consultation

，         Commercial loan application

Q: I am a dealer, can you ship the tractor to my customer's location for me?

A: Yes.

Q: Dealer price, dealer cost?

A: Dealer please check the FOB prices, these prices are 

• FOB Qingdao prices for Foton & Taishan/Kama tractors and implements
• FOB Shanghai prices for Jinma tractors and implements
• Your total cost will have, but not limit to FOB prices, shipping, customs, duties, warehouse charge, processing charges, check FAQ for details
• Shipping cost depends on the your order quantity, from $400 per unit to $4000 per container, which holds from one to up to 8 units, varying on different models and destinations
• To get a quote from us, please have the model #, order quantity for each model, shipping destination, and expected price ready if it is not your first order, we don't quote through phone, email or fax only. If this is not your first order, please advise your offer, if we can match, we will.
• You can order parts with the tractors, order from other dealers and your next coming order
• For first time order for one tractor, your sample price is our retail price

DEFINITION OF NON-VESSEL-OPERATING COMMON CARRIER (NVOCC)
A "NON-VESSEL-OPERATING COMMON CARRIER" OR "NVOCC" MEANS A PERSON WHO:
1) HOLDS ITSELF OUT TO THE GENERAL PUBLIC TO PROVIDE TRANSPORTATION BY WATER OF CARGO BETWEEN THE UNITED STATES AND ANOTHER COUNTRY FOR COMPENSATION THAT (A) ASSUMES RESPONSIBILITY FOR THE TRANSPORTATION FROM THE PORT OR POINT OF RECEIPT TO THE PORT OR POINT OF DESTINATION, AND (B) UTILIZES, FOR ALL OR PART OF THAT TRANSPORTATION, A VESSEL OPERATING ON THE HIGH SEAS OR THE GREAT LAKES BETWEEN A PORT IN THE UNITED STATES AND A PORT IN A FOREIGN COUNTRY, EXCEPT THAT THE TERM DOES NOT INCLUDED A COMMON CARRIER ENGAGED IN OCEAN TRANSPORTATION BY FERRY BOAT, OCEAN TRAMP, OR CHEMICAL PARCEL-TANKER.
2) DOES NOT OPERATE THE VESSEL BY WHICH SUCH TRANSPORTATION IN PROVIDED AND
3) IS A SHIPPER IN ITS RELATIONSHIP WITH THE CARRIER

89039990.--Vessels, yachts and other vessels for pleasure or sports, nesoi--01/01/2004
1% for USA

89039200 9.5% for Canada

85013180.--DC generators of an output not exceeding 750 W--01/01/2006 2.5% US

85013260.--DC generators of an output exceeding 750 W but not exceeding 75 kW--01/01/2006 2% US

8501.32 of an output exceeding 750w but not exceeding 75kw DC generator 2% Canada

Long distance area code

Ask us

Go back to Home