ChinaBestProducts
Yuchai Hydraulics Mini Excavator
SW series 145 to 230hp
hydraulic excavator YCL35 wheel excavator
YC15
YC18 YC25 YC30
YC35 YC45 YC55
YC85 YC135
NT45
YC55 hydraulic excavator, hydraulic system is supplied with the load sensor
system of international advancer lever, which has nothing to do with the load so
that has good effect of saving resource. It utilizes senor hydraulic pilot
device and is user-friendly; The excavator is working platform can rotate 360
degrees and have the function of digging, grabbing, drilling, shoveling,
bull-dozing and stone-breaking. Our excavators have been widely used in erection
of buildings and wooden land, municipal engineering, construction of water
supply, gas, heating and telecommunications construction on farmland.
|
Basic Dimension of YC55 |
| |
|
|
YC55-2 |
| Code |
Item |
Units |
850C |
850D |
850E |
| |
Machine Weight |
Kg |
5710 |
5830 |
5710 |
| |
Volume of Backhoe |
m3 |
0.2 |
0.2 |
0.2 |
| |
Engine |
|
Cummins B3.3 |
| |
Power of engine |
KW/rpm |
45/2200 |
45/2200 |
45/2200 |
| A |
Overall Length
(trans pos) |
mm |
6065 |
6065 |
6065 |
| B |
Overall Height
(trans pos) |
mm |
2590 |
2590 |
2590 |
| C |
Width of
Undercarriage |
mm |
1900 |
1900 |
1900 |
| D |
Width of Track |
mm |
300 (Rubber)/
400(Steel) |
| E |
Maximum Platform
Tail Turning Radius |
mm |
1670 |
1670 |
1670 |
| F |
Length of Track |
mm |
2455 |
2455 |
2455 |
| G |
Sprocket to idler
centres |
mm |
1910 |
1910 |
1910 |
| H |
Dist. between
Undercarriage and Ground |
mm |
340 |
340 |
340 |
| I |
Dist. Between boom
and ground |
mm |
2275 |
2275 |
2275 |
| J |
Width of Platform |
mm |
1830 |
1830 |
1830 |
| K |
Dist. Between Hood
and Ground |
mm |
1670 |
1670 |
1670 |
| L |
Dist. Between
Platform and Ground |
mm |
695 |
695 |
695 |
| |
Outer Width of
Bucket |
mm |
656 |
656 |
656 |
| |
Travelling Speed
(Low/High) |
Km/h |
2.66/4.25 |
2.66/4.25 |
2.66/4.25 |
| |
Swing Speed of
Platform |
rpm |
11.5 |
11.5 |
11.5 |
| |
Cabin |
|
● |
● |
● |
| |
Canopy |
|
|
|
|
| |
Swing boom |
|
|
● |
|
| |
Swing Angularity
of the Digging Arm (L/R) |
° |
|
70/50 |
|
|
Range of Operation |
| |
|
|
YC55-2 |
| Code |
Item |
Units |
850C |
850D |
850E |
| A |
Maximum Digging
Height |
mm |
5700 |
| B |
Maximum Dumping
Height |
mm |
3855 |
| C |
Maximum Digging
Depth |
mm |
3935 |
| D |
Maximum Digging
Radius |
mm |
6380 |
| D1 |
Maximum Digging
Dist.of Ground |
mm |
6196 |
| E |
Maximum Height
Digging Radius |
mm |
4127 |
| F |
Minimum Platform
Tail Turning Radius |
mm |
2670 |
| G |
Maximum Depth for
Bulldozing |
mm |
397 |
| H |
Maximum Height for
Bulldozing |
mm |
251 |
| |
Maximum Digging
Force |
kN |
37.3 |
| Notice: The above
dimension is the nominal data only, and we have the right to
change them without prior notice. |
|
Ask us